public class icevrt
extends nxm.sys.lib.Primitive
implements nxm.sys.inc.Chainable
args, flagsList, id, isPiped, M, MA, MD, MQ, MR, MT, name, option, queue, state, support, threadALAW, AMODE, ASCII, BMAX, BMIN, BOOL, BYTE, COMPLEX, CONVERT_TYPE_LIST, CRAY, DATA_MODE_LIST, DATA_TYPE_LIST, DMAX, DMIN, DOUBLE, EEEI, falseStates, FLOAT, FMAX, FMIN, IEEE, IMAX, IMIN, INT, LMAX, LMIN, LONG, MATRIX, modeList, MULT_DATA_MODE_LIST, NIBBLE, NMAX, NMIN, NONHOMOGENEOUS, NUMBER, NUMERIC_DATA_TYPE_LIST, numericTypeList, OBJECT, PACKED, QUAD, repList, RESULT_TYPE_LIST, SCALAR, STRING, TABLE, TRANSMATRIX, trueStates, typeList, ULAW, VAX, VECTOR, XLONG, XMAX, XMIN, XMODE, XMVALUE, XMVALUE_KVLIST, XMVALUE_LIST, XMVALUE_TABLEANGULAR_VELOCITY_PRECESSING_COR, B1G, B1K, B1M, B1T, B64K, CYC2RAD, DEF_EARTH_ANGULAR_VELOCITY, DEG2METERS, DEG2RAD, E, EARTH_ANGULAR_VELOCITY, EARTH_ECCENTRICITY, EARTH_EQUATORIAL_RADIUS, EARTH_FLATTENING_FACTOR, EARTH_GRAV_CONSTANT_W_ATMOS, EARTH_GRAV_CONSTANT_W_ATMOS_ORIG, EARTH_GRAV_CONSTANT_WO_ATMOS, EARTH_GRAV_CONSTANT_WO_ATMOS_ORIG, FEET2METERS, HALFPI, IAU_EARTH_ANGULAR_VELOCITY, LN2DB, LN2LOG, LNTEN, MASS_OF_EARTH_W_ATMOS, METERS2DEG, METERS2FEET, METERS2NM, METERS2SM, NM2FEET, NM2METERS, PI, POLAR_RADIUS_IN_METERS, POLAR_RADIUS_OF_CURVATURE, RAD2CYC, RAD2DEG, SECOND_EARTH_ECCENTRICITY, SM2FEET, SM2METERS, SPEED_OF_LIGHT, TWOPI| Constructor and Description |
|---|
icevrt() |
| Modifier and Type | Method and Description |
|---|---|
int |
close()
This will finish the commandable objects processing.
|
java.lang.Object |
getNextLink()
Get the next object down the chain.
|
java.lang.Object |
getPrevLink()
Get the next object up the chain.
|
int |
open()
This will prepare the commandable object for processing.
|
int |
process()
This will process the commandable objects algorithm.
|
addProgressFeed, checkin, checkout, finishing, getArgs, getCmdParent, getContext, getID, getInterrupt, getMessageHandler, getMidas, getMQ, getMsgID, getName, getPollTime, getProgress, getState, getStatus, getVerbose, isStateChanged, processException, processMessage, processMessage, processMessages, processReady, restart, run, runSingle, setArg, setArgs, setCmdParent, setMessageHandler, setMsgID, setPollTime, setProgressFeed, setState, setState, setVerbose, stateToString, thisIsMe, toString, verify, whoIsThispublic int open()
nxm.sys.inc.CommandableCommandable.process() and should be used to open
any files needed and to initialize any parameters.open in interface nxm.sys.inc.Commandableopen in class nxm.sys.lib.CommandCommandable.NOOP if this method does no work.Commandable.NORMAL if this method successfully completes and
the Commandable object is ready to be
processed with Commandable.process().Commandable.FINISH if this method successfully completes
and the Commandable object does not require
any processing with Commandable.process() (i.e.
skip directly to Commandable.close()).Commandable.process(),
Commandable.close(),
State Diagram for a Commandable Objectpublic int process()
nxm.sys.inc.CommandableCommandable.open()
method will always be called before this method. This should be
responsible for doing any of the data processing required by the
commandable object.Commandable.NORMAL or Commandable.NOOP.process in interface nxm.sys.inc.Commandableprocess in class nxm.sys.lib.CommandCommandable.NORMAL upon completion of a single pass of the
algorithm.Commandable.FINISH upon successful completion of the entire
algorithm.Commandable.NOOP upon completion of a single pass of the
algorithm in which no work was performed
(this usually indicates that the object is
waiting for another thread to provide data
to process).Commandable.SLEEP upon completion of a single pass of the
algorithm where a pause (see
Time.sleep(double)) is
required before Commandable.process() can be
called again.Commandable.PAUSE
or Commandable.SUSPEND indicates that the Commandable object
should be placed in the Commandable.SUSPEND
state until the Commandable.RESUME
directive is given.Time.sleep(double),
Commandable.open(),
Commandable.close(),
State Diagram for a Commandable Objectpublic int close()
nxm.sys.inc.CommandableCommandable.open() and
Commandable.process(); this includes closing any files opened by
Commandable.open() and clearing any temporary data used by
Commandable.process(). This is the stage where the commandable object
would typically perform any final reporting of data (such as the
setting of RESULTS parameters).close in interface nxm.sys.inc.Commandableclose in class nxm.sys.lib.CommandCommandable.NOOP if this method does no work.Commandable.NORMAL if this method successfully completes.Results,
Commandable.open(),
Commandable.process(),
State Diagram for a Commandable Objectpublic java.lang.Object getNextLink()
nxm.sys.inc.ChainablegetNextLink in interface nxm.sys.inc.ChainableChainable.getPrevLink()public java.lang.Object getPrevLink()
nxm.sys.inc.ChainablegetPrevLink in interface nxm.sys.inc.ChainableChainable.getNextLink()