2019.2:
 * Version 2.2 (Rev. 8)
 * General: Updated for 2019.2
 * Revision change in one or more subcores

2019.1.3:
 * Version 2.2 (Rev. 7)
 * No changes

2019.1.2:
 * Version 2.2 (Rev. 7)
 * No changes

2019.1.1:
 * Version 2.2 (Rev. 7)
 * No changes

2019.1:
 * Version 2.2 (Rev. 7)
 * General: Updated for 2019.1
 * Revision change in one or more subcores

2018.3.1:
 * Version 2.2 (Rev. 6)
 * No changes

2018.3:
 * Version 2.2 (Rev. 6)
 * Bug Fix: UltraScale+ AXI TG ECC Example Design fix (synthesis issue only)
 * Bug Fix: UltraScale AXI TG undersized WRAP accesses fix
 * Bug Fix: (Xilinx Answer 71697) The FSVE1156 package allowed incorrect data widths
 * Bug Fix: VREF value for x4 components changed to match x4 DIMM's
 * Feature Enhancement: (Xilinx Answer 71696) Added support for changing Refresh Parameters through TCL flow
 * Feature Enhancement: Interleave Burst Support added to PHY only designs
 * Revision change in one or more subcores

2018.2:
 * Version 2.2 (Rev. 5)
 * General: Updated for 2018.2
 * Revision change in one or more subcores

2018.1:
 * Version 2.2 (Rev. 4)
 * Bug Fix: Updated enablement dependency of app_wdf_data_mask and updated the same in PG150
 * Bug Fix: AXI arbitration fix- Resolved high latency issue for low bandwidth transaction case
 * Revision change in one or more subcores

2017.4:
 * Version 2.2 (Rev. 3)
 * General: Updated for 2017.4
 * Revision change in one or more subcores

2017.3:
 * Version 2.2 (Rev. 2)
 * Bug Fix: (Xilinx Answer 69827) UltraScale+ Memory IP - The SFVB784 package has incorrect data rates in PL Memory Interfaces
 * Feature Enhancement: Clamshell support for DDR4 ping-pong PHY mode
 * Revision change in one or more subcores

2017.2:
 * Version 2.2 (Rev. 1)
 * Bug Fix: tMRD value updated to 8 for 075E speed grade memory devices.
 * Bug Fix: Calibration SW code fixes.
 * Feature Enhancement: Added Self-refresh/Save-restore support for 3DS parts.
 * Feature Enhancement: Updated 3DS part names to add package info and 3DS part upgrade flow changes for package addition in 3DS parts names.
 * Feature Enhancement: Added GUI option for Partial Reconfiguration flow support as Disable OBUF on reset_n.
 * Feature Enhancement: GUI update to provide detailed information about memory part in memory details.
 * Feature Enhancement: Addition of wr_rd_complete port in example_top file for PHY only and ping-pong PHY.
 * Revision change in one or more subcores

2017.1:
 * Version 2.2
 * Bug Fix: (Xilinx Answer 67392) UltraScale and UltraScale+ Memory IP - pulse width violations can occur
 * Bug Fix: (Xilinx Answer 68236) Upgrading locked IP might fail for select RDIMMs
 * Feature Enhancement: 3DS component support
 * Feature Enhancement: Partial Reconfiguration support
 * Feature Enhancement: Enabled ECC support for Microblaze MCS
 * Feature Enhancement: Self-Refresh and Save-Restore support for LRDIMM
 * Feature Enhancement: DDP wide component supported
 * Feature Enhancement: Removed Selection of CS enable/disable from GUI
 * Revision change in one or more subcores

2016.4:
 * Version 2.1 (Rev. 1)
 * Bug Fix: PFD range checks in GUI for Manual M and D Reference Input clock selection.
 * Bug Fix: Old PHY IPs Update to fix the Phy core generation & Stitching Optimization error in Locked IP Upgrade flow.
 * Bug Fix: 3DS parts performance simulation Updates
 * Bug Fix: DDR4 Self Refresh/Save Restore update for Multi rank design
 * Bug Fix: (Xilinx Answer 67957) UltraScale Memory IP - "Phy core regeneration & stitching failed" occurs when opening an older Vivado project without upgrading the Memory IP
 * Bug Fix: (Xilinx Answer 67933) UltraScale Memory IP - Error messages generated after archiving and moving a project containing Memory IP with a custom part.
 * Bug Fix: (Xilinx Answer 67891) DDR4/DDR3 IP - Ping-Pong PHY behavioral simulations fail with data errors when using BFM simulation mode
 * Revision change in one or more subcores

2016.3:
 * Version 2.1
 * Port Change: ECC ports are added to provide status of ECC when AXI is disabled.
 * Bug Fix: Added ports for proper ECC functionality and also adds the app_wdf_mask signal back to the User Interface to support Partial Writes AR67455.
 * Bug Fix: Enables generating 80-bit wide DDR4 interfaces for xcku115-flvf1924 FPGAs AR67632.
 * Bug Fix: Corrected the speed grade of 093F to 093E AR67631.
 * Bug Fix: Corrected issue within User Interface logic that potentially caused data errors and incorrect app_rdy behavior. AR67544
 * Bug Fix: Resolved custom part issues related to moving IP, opt_design errors when skipping "Generate Output Products", and Core Container flow.  ARs 67684, 67335, and 66360.
 * Bug Fix: Usage of six or more DDP (Dual Die Package/Twin Die) components is limited to 2133Mbps operation. DDR4 tool now properly adheres to this spec. AR66938
 * Feature Enhancement: Microblaze MCS 3.0 support.
 * Feature Enhancement: Clamshell support for DDR4 controller and Phy only mode
 * Feature Enhancement: Migration support for DDR4 controller and Phy only mode
 * Feature Enhancement: Parity support for DDR4 RDIMMs
 * Feature Enhancement: Self Refresh and Save Restore support for AXI Interface
 * Revision change in one or more subcores

2016.2:
 * Version 2.0 (Rev. 1)
 * Updated for 2016.2
 * Revision change in one or more subcores

2016.1:
 * Version 2.0
 * Updated for 2016.1
 * Resolved issues related to certain speed grades incorrectly preventing previously allowed input clock periods.  See Xilinx Answer 62543 for details.
 * Added DBI (Data Bus Inversion) Support
 * Revision change in one or more subcores

2015.4.2:
 * Version 1.1
 * No changes

2015.4.1:
 * Version 1.1
 * No changes

2015.4:
 * Version 1.1
 * Updated for 2015.4
 * Revision change in one or more subcores

2015.3:
 * Version 1.0
 * Initial release
 * Derived from MIG IP in previous releases
 * IP revision number added to HDL module, library, and include file names, to support designs with both locked and upgraded IP instances
 * Resolved issue related to Dynamic DCI does not work for select ES devices.
 * Resolved issue related to CAS Latency setting of 17 resulting in calibration failures during DQS Gate Calibration.
 * Resolved issue related to [Xicom 50-24] error message occurring after programming device.
 * Resolved issue related to customization GUI showing incorrect Enable Chip Select Pin option when recustomizing IP.

(c) Copyright 2013 - 2019 Xilinx, Inc. All rights reserved.

This file contains confidential and proprietary information
of Xilinx, Inc. and is protected under U.S. and
international copyright and other intellectual property
laws.

DISCLAIMER
This disclaimer is not a license and does not grant any
rights to the materials distributed herewith. Except as
otherwise provided in a valid license issued to you by
Xilinx, and to the maximum extent permitted by applicable
law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
(2) Xilinx shall not be liable (whether in contract or tort,
including negligence, or under any other theory of
liability) for any loss or damage of any kind or nature
related to, arising under or in connection with these
materials, including for any direct, or any indirect,
special, incidental, or consequential loss or damage
(including loss of data, profits, goodwill, or any type of
loss or damage suffered as a result of any action brought
by a third party) even if such damage or loss was
reasonably foreseeable or Xilinx had been advised of the
possibility of the same.

CRITICAL APPLICATIONS
Xilinx products are not designed or intended to be fail-
safe, or for use in any application requiring fail-safe
performance, such as life-support or safety devices or
systems, Class III medical devices, nuclear facilities,
applications related to the deployment of airbags, or any
other applications that could lead to death, personal
injury, or severe property or environmental damage
(individually and collectively, "Critical
Applications"). Customer assumes the sole risk and
liability of any use of Xilinx products in Critical
Applications, subject only to applicable laws and
regulations governing limitations on product liability.

THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
PART OF THIS FILE AT ALL TIMES.
